Axle nut, reverse thread?

The0FaLLen0 · 04-10-2005, 7:15 PM

I've taken off the tire and the cover plate, but the axle nut is stuck and a friend said it could be reverse thread. Any immediate help would be appreicated. 97' CL

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Acurazine!

wilp99 · 04-10-2005, 8:01 PM

naw pimp. its just tight as hell u need a breaker bar.

wilp99 · 04-10-2005, 8:02 PM

just a stupid question but did u remove the cotter pin?

The0FaLLen0 · 04-10-2005, 8:47 PM

The hub that goes over the spines on the axel is stuck and wont come off. Theres a puller on it but it wont come off. What should i do.

LCARUCA 97 · 04-10-2005, 10:17 PM

i had to use a 1" drive socket and one of the legs off the engine hoist to break mine free.

wilp99 · 04-10-2005, 10:45 PM

hit it with a big ass hammer with the nut on flush with the end of the axle. or use a deadblow. plastic hammer filled with sand. or a big ass rubber mallet.

wilp99 · 04-10-2005, 10:47 PM

have u taken anything else but the nut off? balljoints, tie rod anything? well, first get it to go in alittle so u can breake the rust then u have to take off the ball joints upper and lower and tie rod to remove the axle. wait what the hell r u doing ne ways?

The0FaLLen0 · 04-10-2005, 11:56 PM

lol thx for the help im just replacing my bearings because my front left one is dying and is making really grinding sounds and i havnt drivin it for a while xcept today to this house to get it fixed. we got to the axle hub thing it should slide right ( with a little muscle ) off and i should be able to take the rotor off shouldnt i? we cant get this little hub off and weve used a puller with no success. so tommorow we are using a torch to heat it up and the puller to get it off. but any advice is appreciated.

baka_t · 04-11-2005, 12:41 AM

1000lb 3/4 impact gun will do the trick.

The0FaLLen0 · 04-11-2005, 7:32 AM

Quote:

Originally Posted by baka_t

1000lb 3/4 impact gun will do the trick.

we finaly got the nuts n crap off we just cant get that little hub off to get to the rotor, this is where were stuck and i cant have my baby back.

wilp99 · 04-11-2005, 4:19 PM

what year is it? 97 is pressed on, theres a way to get it off without getting it pressed off but ull have to do a search. 98-99's are bolt on.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-10-2005, 8:47 PM	#4
The0FaLLen0 AzN-SoLjA Garage is empty, add now Trader Rating: (0) Join Date: Apr 2004 Location: STL Posts: 89 Thanks: 0 Thanked 0 Times in 0 Posts Threadstarter	The hub that goes over the spines on the axel is stuck and wont come off. Theres a puller on it but it wont come off. What should i do.

04-10-2005, 10:17 PM	#5
LCARUCA 97 Trailblazer = SUCK Garage is empty, add now Trader Rating: (0) Join Date: Nov 2001 Location: Quad Cities IL. Posts: 1,013 Thanks: 0 Thanked 0 Times in 0 Posts	i had to use a 1" drive socket and one of the legs off the engine hoist to break mine free.

04-10-2005, 11:56 PM	#8
The0FaLLen0 AzN-SoLjA Garage is empty, add now Trader Rating: (0) Join Date: Apr 2004 Location: STL Posts: 89 Thanks: 0 Thanked 0 Times in 0 Posts Threadstarter	lol thx for the help im just replacing my bearings because my front left one is dying and is making really grinding sounds and i havnt drivin it for a while xcept today to this house to get it fixed. we got to the axle hub thing it should slide right ( with a little muscle ) off and i should be able to take the rotor off shouldnt i? we cant get this little hub off and weve used a puller with no success. so tommorow we are using a torch to heat it up and the puller to get it off. but any advice is appreciated.

04-11-2005, 12:41 AM	#9
baka_t The movement has started Garage is empty, add now Trader Rating: (0) Join Date: Apr 2003 Location: Hawaii Age: 33 Posts: 3,675 Thanks: 0 Thanked 0 Times in 0 Posts	1000lb 3/4 impact gun will do the trick.

04-11-2005, 4:19 PM
AcuraZine Acura Integra Paid Advertisement