o0o0o0

iTrader: (1)

Which ebay seller did you buy it from?

01CLinprocess

iTrader: (2)

x2, would really like to know. As soon as I can get some sort of confirmation these fit I'm getting them.

Ponto

eBay Item 321323096975.

o0o0o0

iTrader: (1)

I asked this seller a while back and he didn't know whether they fit or not

Scottyknows007

Any update on this project?

Ponto

We are moving this weekend but will try to post an update within a few weeks. Sorry for the delay

Though my car is getting some paint work done this week which I am pretty excited about. I thought I could live with the blemishes that came with it but I am too OCD.

o0o0o0

iTrader: (1)

Any members with the srs headers, can you measure the openings of all the pipes?

Thanks is advance.

Scottyknows007

Hey Vaymoon, when you had these installed was there any problem of them clearing the drive shaft? I ordered some this past week and then wouldn't clear the motor mount unless i removed it, then the down pipe didn't clear the drive shaft, similar experience? ever heard of this?

Accord316

interesting complaints thread against xs-p or ssautochrome

http://www.bblgroup.us/ssautochrome.htm

http://honda-tech.com/showthread.php?t=1323296

Ponto

I finally installed the headers I bought from SRS Tuning via eBay (see details above). The fit was perfect for my 6 speed. My friends and I were also impressed with the quality. I didn't measure the openings but I have some pics if anyone is interested.

The install took about 4.5 hours but it was mostly related to getting the original exhaust out. Once that was done the headers were in in less than an hour. Unbelievable mod for $200!

Scottyknows007

Could you send me some pictures? thinking about buying a set today

Ponto

[/IMG]https://www.flickr.com/photos/125925...8/14368854897/[/IMG]

https://www.flickr.com/photos/125925...8/14554420772/

https://www.flickr.com/photos/125925...8/14368693229/

https://www.flickr.com/photos/125925...8/14368693939/

https://www.flickr.com/photos/125925...8/14368701818/

https://www.flickr.com/photos/125925...8/14368618840/

03 tls nc

iTrader: (6)

thanks for the update Ponto. how was the quality of the joints on the inside?

Ponto

They were fine. Did not see any areas of concern.

3.2cltypesm6

Ponto quick question did you use the gaskets and bolts included or did you use the one you had already?

Ponto

I used the ones included, except new bolts for the cat since they were rusted.

Scottyknows007

I can confirm with Ponto. The SRS headers did fit! I had to remove the rear mount to get them on and they were slightly off on the alignment with the down pipe connecting to the the bottom of the front header. But in the end it still worked. Deff feel the difference!

01CLinprocess

iTrader: (2)

Here's some pics. They fit like a glove. Offer $200 shipped (160 + 40 for shipping), and the seller will take it. You can't beat this for $200 flat.

Clearance for rear motor mount, as you can see there's plenty.


OEM Flex Pipe had had enough.




Front


Engine bay needs cleaning bad (and a battery cover *cough* donations wecome *cough*). No, those aren't zip ties holding my catch can to my strut brace .

01CLinprocess

iTrader: (2)

One more rear bend pic for those thinking of pulling the trigger (do it).

3.2cltypesm6

I got mine last week for $187.99 shipped. just make a reasonable offer and you might get a deal. I plan on installing them Tuesday.

dannysayaseng

bringing this thread back because these headers are so cheap. any update on the quality of the srs headers after having them for a few months?

Ponto

Mine have been fine after 4 months. However last week I started hearing a leak. I have torqued everything back down and it is better, but there is still something small. Thinking it may be a gasket but I haven't narrowed down which one.

Scottyknows007

Got mine right after Ponto.. No issues so far. But mine did not go on as easy as as Ponto's

dannysayaseng

Nice. I just bidded a fair amount and got accepted today! It'll be a while til I put it on though, I'll be waiting after my MT swap to do so which shouldn't be too far along down the road. Just a few more parts and it's go time!

spaceghostpurrp

Can any one please post the link where to buy headers for a 6mt
thanks !

Scottyknows007

http://www.ebay.com/itm/SRS-Full-T-304-Stainless-Steel-EXHAUST-Header-1998-2002-Honda-ACCORD-V6-3-0L-JDM-/321323096975?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AHonda%7CModel%3AAccord&hash=item4ad0595b8f&vxp=mtr

yody

anyone know where to get a test pipe?

JDM CLS6

Just got my test pipe from heeltoeautomtive. It's an exelerate test pipe and I got the defouler as well so I have no CEL. I must say I love the sound.

JDM CLS6

Does anyone have a contact number for XS Power or SSAutochrome? I have been trying to order my headers for a month now. Last I heard was that they're in production and I have a 6spd so I need one with that bend to clear the rear motor mount. I'm getting tired of waiting.

JarrettLauderdale

Why not buy them from the link that Scotty posted that everyone else that's posted on here with success has purchased from?

Scottyknows007

I would be absolutely cautious buying from XS or SS Auto.. I got my parts from them. They didn't fit, and I held on to them for over 2 months before they finally got back to me about a return and refund. (I have even read about people on here being refused a refund)

SRS Tuning was very responsive and worked with me in case they didn't fit they were standing by to return them.

Go with SRS..

dannysayaseng

Well.. i got mine today! Quality and welds aren't bad at all. Except one little thing, they sent 2 exhaust manifolds and left out the intake. It's all getting sorted out so no worries!

dannysayaseng

Pics as well

gnuts

iTrader: (1)

what do you mean? What's pictured is was is supposed to be there. 2 exhaust manifold and the J pipe. No one makes intake manifolds.

There is no bend on those to clear a 6speed rear mount and the merge on the J pipe doesn't look very good. it hits the other pipe dead on when it should curve towards the rear of the car more before merging.

dannysayaseng

oops. what i meant was that they sent 2 of the same manifolds, both with no bending to clear the rear mount

gnuts

iTrader: (1)

oh i see. good luck with everything!

JDM CLS6

From the pictures, it doesn't look like the rear header will fit. I have a 6spd manual. I guess I might just have to save up a bit more and get comptech.

dannysayaseng

the rear header won't fit. it was a mishap on shipping and they accidentally shipped both front manifolds rather than 1 of each. but all is well and is being corrected in the process

fsttyms1

Personally i wouldnt want those. The 2 flex joints are there so that the crappy alignment wont be an issue, and its one more thing to fail sooner

yody

The cheapest they will take is 159+ ship= 198. Hmmmm