gnuts

iTrader: (1)

matt: use google.

Stephen00TL

They are discontinued so unless somebody still has them in stock your only chance of getting them will be to get a used set

Boxer209

As far as what effected the sound of my CL I loved the combo I had of aem cold air, Comptech header and greddy Evo exhaust. If I was casually driving around town or getting on the pedal it sounded great. Not knocking the Comptech axle back, I think it actually sounds nice but to me the Greddy Evo isn't any louder just deeper and more throatier if that makes sense.

CL-S progression 01

iTrader: (2)

i added the xlr8 high flow cat now with the headers, intake and ct mufflers... extremely aggressive sound at high rpm.... str8 f1 sound i swear thats what my buddies say when i redline under a bridge.

at low rpm its a tad raspy depending on throttle, but when ur daily driving its nice and quiet.

johndo18

Got the axles backs on my 03 with headers and a supercharger. Sounds deep and a has a nice non offensive tone. Actually kind of too quiet for me but mind you I have a stock b-pipe. Not to mention I really like the looks of them from the rear. The oval exhaust has a sweet presence

CL-S progression 01

iTrader: (2)

yea they are quiet when daily driving... but i would get annoyed with it if it was always loud to be honest. they sing a hell of a note when ur on the pedal tho. and they are cheaper than buying new mufflers from acura. iirc two mufflers run about 900 here in canada vs two ct mufflers which cost 815 shipped with taxes. and i picked them up at toronto honda

johndo18

With prices like that in canada its a nobrainer!

silvercoupe01

I have an 01 Cl-S and I'm trying to find ways to tweak my factory exhaust to get just a little louder. Someone mentioned removing the middle muffler and leaving everything else intact. Any suggestions?

gnuts

iTrader: (1)

The mid-muffler removes rasp, so I'd leave it. Why not grab some magnaflows and have a shop weld them on. A popular one is 14832.

R J Poseidon 6

www.KingsPerformance.com is a CTEngineering dealer & might be able to get it for you

mattcl-s

yup discontinued just about everywhere

01CLinprocess

iTrader: (2)

Best way to go about doing an exhaust for our cars now is to provide your own mandrel bends, resonator, HFC, and mufflers.

Mandrel Exhaust Systems has great prices on 2.25"-3" diameter in either mild or stainless.

98-02 HONDA ACCORD EXHAUST TUBING KIT - DUAL

Pair that with an 18"-24" magnaflow or dynomax resonator, universal high flow cat (much cheaper than direct fit), and two mufflers (usually magnaflows). Bam! You've got yourself your own madrel bent custom exhaust that just needs to be welded up.

Get the resonator and mufflers from the advance auto webstore and use the correct coupons.

Parts will be anywhere from $400-$600, plus welding. $800 or less for something better than the few catbacks available for our cars.

hue_hustler

do still have the comptech exhaust for the cl? from front to back?

01CLinprocess

iTrader: (2)

CT headers, b-pipe, and axlebacks are all discontinued for the CL. That's why our best option is custom fabrication at this point.